7899 scsi controller are shown in, Table 2 – Dell PowerEdge 6400 User Manual
Page 58

Table 2. AIC-7899 SCSI Controller Settings
Host Adapter SCSI ID
7
SCSI Parity Checking
Enabled
Host Adapter SCSI Termination
Enabled
Additional Options
Boot Device Options:
Boot SCSI ID
0
Boot LUN Number
0
SCSI Device Configuration:
Sync Transfer Rate
20 MB/sec
Enable Disconnection
Yes (Enabled)
Send Start Unit Command
Yes (Enabled)
BIOS Multiple LUN Support
No (Disabled)
Include in BIOS Scan
Yes (Enabled)
Advanced Host Adapter:
Reset SCSI Bus at IC Initialization
Enabled
Display
Initialization
Enabled
Extended BIOS Translation For DOS
Drivers > 1 GB
Enabled
Verbose/Silent Mode
Verbose
Host Adapter BIOS
Enabled
Domain Validation
Enabled
Support Removable Disks Under BIOS As
Fixed Disks
Boot Only
BIOS Support For Bootable CD-ROM
Enabled
BIOS Support For Int13 Extensions
Enabled
NOTE: For the full name of an abbreviation or acronym used in this table, see the
Glossary
.
Setting
Default
SCSI Bus Interface Definitions
Host Adapter SCSI ID
7
SCSI Parity Checking
Enabled
Host Adapter SCSI Termination
Enabled
Additional Options
Boot Device Options: