Dell PowerEdge 2500SC - Manual (Page 31)

Assigning and Deleting an Asset Tag Number
An asset tag number can have up to ten characters; any combination of characters, excluding spaces, is valid.
To assign or change an asset tag number, perform the following steps:
1. Perform the steps in " Using the Asset Tag Utility ."
2. Type asset and a space followed by the new number.
For example, type the following command:
asset 1234567890
3. Press .
4. When you are prompted to verify the asset tag number, type y and press .
The system then displays the new or modified asset tag number and the service tag number.
To delete the asset tag number without assigning a new one, type asset /d and press .
Table 2-2 lists the command-line options you can use with the Asset Tag utility. To use one of these options, type asset and a space followed by the option.
Back to Contents Page
NOTE: The Asset Tag utility diskette contains CD-ROM drivers that provide access to the CD-ROM drive when you boot from the diskette.
Table 2-2. Asset Tag Command-Line Options
Asset Tag Option Description
/d Deletes the asset tag number
/? Displays the Asset Tag utility help screen