Figure 4-1, I/o ports and connectors -2 – Dell OptiPlex Gxi User Manual
Page 58
4-2
Dell OptiPlex GXi Low-Profile Systems Reference and Installation Guide
You can also obtain client drivers for OS/2 from the Dell
bulletin board service (BBS). See the chapter titled “Get-
ting Help” in your Diagnostics and Troubleshooting
Guide for the contact number for your location.
Your system also includes server drivers for NetWare
3.12 and 4.10 and can update the following Network
Driver Interface Specification (NDIS) 2.01 drivers:
•
MS-DOS and Microsoft Windows 3.x
•
NDIS 2.01 for DEC PATHWORKS
•
Banyan VINES Client
•
IBM LAN Server
•
Microsoft LAN Manager
•
Artisoft LANtastic
See the appropriate subsection found later in this chapter
for instructions on installing and configuring any of these
drivers.
The NIC connector on the computer’s back panel has the
following indicators:
•
A yellow activity indicator flashes when the system
is transmitting or receiving network data. (A high
volume of network traffic may make this indicator
appear to be in a steady “on” state.)
•
A green link integrity indicator lights up when there
is a good connection between the network and the
NIC. When the green indicator is off, the computer is
not detecting a physical connection to the network.
Figure 4-1. I/O Ports and Connectors
keyboard
connector
mouse
connector
serial port
connector
USB
connectors
parallel port
connector
NIC connector
line-out jack
microphone jack
video connector
line-in jack