Dell OptiPlex 320 - Manual (Page 84)

8. Gently press down on the card retention mechanism to secure the adapter bracket in place.
9. Close the card retention latch by snapping it into place.
10. Replace the computer cover (see Replacing the Computer Cover ).
11. Uninstall the card's driver. See the documentation that came with the card for instructions.
12. If you removed a sound card:
a. Enter system setup, select Audio Controller, and change the setting to On (see Entering System Setup ).
b. Connect external audio devices to the audio connectors on the back panel of the computer.
13. If you removed an network-adapter card connector:
a. Enter system setup, select Network Controller, and change the setting to On (see Entering System Setup ).
b. Connect the network cable to the integrated network connector on the back panel of the computer.
Back to Contents Page
1 card fully seated
2 card not fully seated
3 bracket within slot
4 bracket caught outside of slot
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.