Dell Inspiron 9400 - Manual (Page 128)

128
Adding and Replacing Parts
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and
realign the card.
5 Install the replacement Mini-Card:
a Align the Mini-Card with the connector at a 45-degree angle, and press the Mini-Card down into
the securing clips until the card clicks into place.
NOTICE:
To avoid damaging the Mini-Card, never place cables under the card.
b Connect the antenna cables to the antenna connectors on the Mini-Card by matching the color of
the cable to the color of the triangle above the connector. Connect the main antenna cable (white)
to the antenna connector with the white triangle. Connect the auxiliary antenna cable (black) to
the antenna connector with the black triangle.
NOTE:
If your computer has a gray cable, connect it to the connector with the gray triangle, if one is available on
your card.
1 securing clips 2 antenna connectors (2) 3 Mini-Card connector
2
3
1
PD598a01.book Page 128 Monday, February 6, 2006 2:24 PM