beautypg.com

Dell Inspiron 9400 User Manual

Page 126

background image

126

Adding and Replacing Parts

NOTICE:

To avoid damaging the system board, you must remove the battery before you begin working inside the

computer.

1 Follow the procedures in "Before You Begin" on page 117.
2 Turn the computer over and loosen the captive screws from the Mini-Card/modem cover.
3 Place your finger under the cover at the indentation, and lift the cover to remove it.

4 If a Mini-Card is not already installed, go to step 5. If you are replacing a Mini-Card, remove the

existing card:

a

Disconnect the antenna cables from the Mini-Card.

PD598a01.book Page 126 Monday, February 6, 2006 2:24 PM