Replacing the computer cover, Removing the computer cover – Dell Studio Hybrid D140G (Mid 2008) User Manual
Page 14
Back to Contents Page
Replacing the Computer Cover
Dell™ Studio Hybrid Service Manual
Removing the Computer Cover
1.
Follow the procedures in
Before You Begin
.
2.
Remove the stand by lifting the computer from the stand.
3.
Place the computer horizontally and remove the screw.
4.
Place the computer vertically and pull the sleeve gently towards the back of your computer.
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To guard yourself against an electrical shock, always unplug your computer from the electrical outlet before removing the cover.
NOTICE:
Ensure that sufficient space exists to support the system with the cover removed—at least 30 cm (1 ft.) of desktop space.
NOTICE:
To avoid scratches during this procedure, place the computer on a mat.