Dell PowerEdge RAID Controller H200 - Manual (Page 33)

Driver Installation
33
4 From the list of drivers displayed, select the driver that you require. Select the
self-extracting zip file and click Run. Copy the driver to a diskette drive, CD,
DVD, or USB drive. Repeat this step for all the drivers that you require.
5 During the operating system installation described in "Installing the Driver
During a Windows Server 2003 Operating System Installation" on page 33
and "Installing the Driver During a Windows Server 2008 or Windows
Server 2008 R2 Installation" on page 34, use the media that you created
with the Load Driver option to load mass storage drivers.
Downloading Drivers From the Dell Support Website
1 Go to support.dell.com.
2 Click Drivers and Downloads.
3 Enter the service tag of your system in the Choose by Service Tag field or
select your system’s model.
4 Select the System Type, Operating System, Driver Language,
and Category from the drop-down list.
5 The drivers that are applicable to your selection are displayed. From the
available list, download the drivers that you require to a diskette drive,
USB drive, CD, or DVD.
6 During the operating system installation described in "Installing the Driver
During a Windows Server 2003 Operating System Installation" on page 33
and "Installing the Driver During a Windows Server 2003 Operating
System Installation" on page 33, use the media that you created with the Load
Driver option to load mass storage drivers.
Installing the Driver During a Windows Server 2003 Operating
System Installation
Perform the following steps to install the driver during operating system
installation.
1 Boot the system using the Windows Server 2003 media.
2 When the message Press F6 if you need to install a third party SCSI or
RAID driver appears, press the key immediately.
Within a few minutes, a screen appears that asks for additional controllers
in the system.
PERC H200.book Page 33 Tuesday, July 13, 2010 4:15 PM