Dell POWEREDGE M1000E - Manual (Page 12)

10 Dell 8/4Gbps FC SAN Module Hardware User’s Manual
53-1001964-01
Hardware Description
1
Nonport side
The nonport side of the FC SAN Module (shown in Figure 3 ) is seated into the enclosure. You do not
need to line up the FC SAN Module as it will seat correctly when the insertion arm is closed.
When the FC SAN Module is inserted, the backplane connectors activate a connection port,
allowing the FC SAN Module to be configured in the PowerEdge Blade Enclosure.
FIGURE 3 Nonport side, viewed from top
1. I/O module handle. Lifting the handle’s release latch opens the handle to install and remove
the module from the PowerEdge Blade Enclosure.
2. Product label including serial number.
3. Connectors
Labeling
Figures 3 shows the labels appearing on the FC SAN Module. A second serial label is located
beneath the insertion arm on the enclosure (visible only when the arm is extended).
To extend the insertion arm, gently squeeze the release tab and pull outward.
1
2 3