Dell XPS 630i (Early 2008) - Manual (Page 97)

Troubleshooting Tools
97
Starting the Dell Diagnostics From the Drivers and Utilities Media
1 Insert the Drivers and Utilities media.
2 Shut down and restart the computer.
When the DELL logo appears, press immediately.
NOTE:
If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft
®
Windows
®
desktop; then, shut down your
computer and try again.
NOTE:
The next steps change the boot sequence for one time only. On the
next start-up, the computer boots according to the devices specified in the
system setup program.
3 When the boot device list appears, highlight CD/DVD/CD-RW and press
.
4 Select the Boot from CD-ROM option from the menu that appears and
press .
5 Type
1 to start the CD menu and press to proceed.
6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple
versions are listed, select the version appropriate for your computer.
7 When the Dell Diagnostics Main Menu appears, select the test you want
to run.
book.book Page 97 Friday, April 25, 2008 3:58 PM