S-video and s/pdif digital audio – Dell XPS 630i (Early 2008) User Manual
Page 51

Using Multimedia
51
1 Turn off the computer and the TV and/or audio device that you want to
connect.
NOTE:
If your TV or audio device supports S-video but not S/PDIF digital audio, you
can connect an S-video cable directly to the S-video TV-out connector on the
computer (without the TV/digital audio adapter cable).
2 Plug one end of the S-video cable into the S-video output connector on
the computer.
3 Plug the other end of the S-video cable into the S-video input connector
on your TV.
4 Plug the single-connector end of the audio cable into the headphone
connector on your computer.
5 Plug the two RCA connectors on the other end of the audio cable into the
audio input connectors on your TV or other audio device.
6 Turn on the TV and any audio device that you connected (if applicable),
and then turn on the computer.
7 See "Enabling the Display Settings for a TV" on page 63 to ensure that the
computer recognizes and works properly with the TV.
S-Video and S/PDIF Digital Audio
1
S-video TV-out connector
2
composite video adapter
1
2
book.book Page 51 Friday, April 25, 2008 3:58 PM