Using nvidia mediashield, Creating a raid array – Dell XPS 630i (Early 2008) User Manual
Page 71

About RAID Configurations
71
6 Use the up- and down-arrow keys to select a hard drive to include in the
RAID array and then use the right-arrow key to move the selected drive
from the Free Disks field to the Array Disks field. Repeat for each disk you
want to include in the RAID array.
NOTE:
Your computer supports a maximum of two drives per RAID 1 array and
four drives per RAID 0 array.
7 After assigning the hard drives to an array, press
The Clear disk data prompt appears.
NOTICE:
You will lose all data on the selected drives in the next step.
8 Press
The Array List window appears.
9 To review the details of the array that you set up, use the arrow keys to
highlight the array in the Array Detail window and press
The Array Detail window appears.
NOTE:
To delete an array, use the arrow keys to select the array and press
10 Press
11 Press
Using Nvidia MediaShield
Nvidia MediaShield allows you to create, view, and manage RAID configurations.
NOTE:
Use Nvidia MediaShield to create a RAID configuration only when you are
adding one or more new hard drives to an existing (non-RAID) single-drive
computer, and you want to configure the new drive(s) into a RAID array.
Hard drives of any size may be used to create a RAID configuration using
Nvidia MediaShield. Ideally, however, the drives should be of equal size to
avoid unallocated or unused space. For an explanation of RAID levels and
their requirements, see "About RAID Configurations" on page 67.
Creating a RAID Array
NOTICE:
The following procedure will result in the loss of all data on your hard drive(s).
Back up any data you want to keep before continuing.
NOTE:
Do not use the following procedure to migrate an existing RAID configuration (see
"Converting From One RAID Configuration to Another RAID Configuration" on page 73).
book.book Page 71 Friday, April 25, 2008 3:58 PM