Dell Latitude CPi A - Manual (Page 46)

38 Dell Latitude CPiA Service Manual
([KDXVW)DQ
)LJXUH([KDXVW)DQ5HPRYDO
1. Remove the back cover assembly.
2. Remove the keyboard assembly.
3. Remove the palmrest assembly.
4. Disconnect the exhaust fan power cable from connector J10 on the system
board.
5. Remove the two 12-mm screws securing the exhaust fan, and then
remove the exhaust fan.
NOTE: When you replace the exhaust fan, orient the fan so that the fan label
faces outward and the power cable is at the upper-right corner of the fan
(when viewed from the back of the computer). (This prevents the fan wires
from being pinched when you reassemble the computer.) Make sure that the
wires are routed under the upper EMI shield.
exhaust fan
12-mm screws (2)
exhaust fan power cable
connector (JFAN1)