Cabletron Systems 2200 - Manual (Page 29)

Network Requirements 2-1
2
Network Requirements
Before installing the 2E253-49R, review the requirements and specifications referred to in this
chapter concerning the following:
• SmartTrunk ( Section 2.1 )
• 100BASE-T Twisted Pair Network ( Section 2.2 )
The network installation must meet the requirements to ensure satisfactory performance of this
equipment. Failure to do so will produce poor network performance.
2.1 SmartTrunk
To connect the 2E253-49R to a network so it can take advantage of the SmartTrunk feature, there
are certain rules concerning port connections and configurations that must be followed for proper
operation. Refer to the Cabletron Systems SmartTrunk User’s Guide for additional information.
2.2 10BASE-T NETWORK
When connecting a 10BASE-T segment to any of the 2E253-49R ports (1 through 48), ensure that
the network meets the Ethernet network requirements of the IEEE 802.3 standard for 10BASE-T.
Refer to the Cabletron Systems Cabling Guide for details.
NOTE
The Cabletron Systems SmartTrunk User’s Guide and Cabling Guide referred to in the
following sections can be found on the Cabletron Systems World Wide Web site:
http://www.cabletron.com/