Display, Display assembly – Dell Inspiron 5160 User Manual
Page 9
Back to Contents Page
Display
Dell™ Inspiron™ 5160 Systems Service Manual
Display Assembly
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
hard drive
.
3.
Remove the
optical drive
.
4.
Remove the
hinge cover
.
5.
Remove the
keyboard
.
6.
Close the display.
7.
From the back of the computer, remove the two M2.5 x 5-mm screws.
.
8.
Open the display assembly approximately 180 degrees, and support the display assembly so that it does not open past this position.
9.
Remove the two M2.5 x 5-mm screws from each hinge bracket.
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface.
1 M2.5 x 5-mm screws (4)
2 display assembly
3 hinge brackets (2)