Emi shield, video card, and palm rest, Emi shield, Removing the emi shield – Dell Inspiron 5160 User Manual
Page 20: Installing the emi shield
Back to Contents Page
EMI Shield, Video Card, and Palm Rest
Dell™ Inspiron™ 5160 Systems Service Manual
EMI Shield
Removing the EMI Shield
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
hinge cover
.
3.
Remove the
keyboard
.
4.
Remove the one M2.5 x 8-mm screw that secures the EMI shield to the system board, and pull the EMI shield out of the computer base.
Installing the EMI Shield
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Pivot the bottom feet of the EMI shield into place and place the shield down on the computer base. Align the screw hole and replace the one M2.5 x 8-
mm screw that secures the EMI shield to the system board.
3.
Replace the keyboard.
4.
Replace the hinge cover.
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface.
1 button board
2 EMI shield
3 M2.5 x 8-mm screw (1)