Dell 5535dn Mono Laser MFP - Manual (Page 293)

ENERGY STAR
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser
products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
nominally a 5 milliwatt gallium arsenide laser operating in the wavelength of 770-795 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.
Laser advisory label
A laser notice label may be affixed to this printer as shown:
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic inputs. 700 W
Copying The product is generating hard-copy output from hard-copy original
documents.
765 W
Scanning The product is scanning hard-copy documents. 165 W
Ready The product is waiting for a print job. 95 W
Power Saver The product is in energy-saving mode. 21 W
Off The product is plugged into a wall outlet, but the power switch is turned
off.
110V = 0.15W, 220V = 1.25W
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Notices
293