Dell PowerEdge 2850 - Manual (Page 12)

Optional External SCSI Connection
Figure 1 -10 illustrates how to properly route an optional external SCSI cable to the expansion-card riser connectors.
Proper SCSI cable-routing guidelines for this configuration are listed below:
l After mounting the external SCSI cable connector in the back-panel connector slot, raise the handle on FAN_5, insert the cable into the clip opening on
the back-fan tray, and then close the fan handle. This secures the back end of the cable and also helps prevent air-flow impedance.
l Ensure that the cable is inserted into the three cable-routing clips on top of the memory module shroud. This secures the cable in place and also helps
prevent air-flow impedance.
l Ensure that the cable is inserted into the cable-routing clips on the front-fan tray. This secures the cable in place and also helps prevent air-flow
impedance.
Figure 1-10. Optional External SCSI Connections
Back to Contents Page