Dell Studio 1737 (Late 2008) - Manual (Page 27)

¡ Remove the four M3 x 3-mm screws securing the hard drive cage to the hard drive.
l For Hard Drive 2:
¡ Remove the four screws securing the hard drive assembly to the computer base.
¡ Pull the black pull-tab on the hard drive to disconnect the hard drive from the system board connector and to lift the hard drive assembly
out of the computer.
¡ Remove the four M3 x 3-mm screws securing the hard drive cage to the hard drive.
1 hard drive 2 interposer
1 M3 x 3-mm screws (4) 2 hard drive cage
3 hard drive
1 screws (4) 2 hard drive assembly
3 black pull-tab
1 M3 x 3-mm screws (4) 2 black pull-tab
3 hard drive cage