Dell Inspiron 3800 - Manual (Page 47)

Solving Problems 47
6 Press the arrow keys to select the following boot sequence:
• Boot First Device: CD/DVD/CD-RW Drive
• Boot Second Device: Diskette Drive
• Boot Third Device: Internal HDD
7 Press to save your changes and exit the system setup program.
8 Restart the computer.
9 After the computer restarts and loads the diagnostic utility, press the
down-arrow key to select Exit to MS-DOS and then press .
Delete the Old Hibernate File
1 Boot your computer from the System Software CD as described on
page 46.
2 At the
R:\DIAGS
prompt, type
cd\
and press .
3 At the
R:\
prompt, type
cd\win98\suspend
and press .
4 Type
rms2d
and press .
5 Create the hibernate file.
Create the Hibernate File
1 Boot your computer from the System Software CD as described on
page 46.
2 At the
R:\DIAGS
prompt, type
cd\
and then press .
3 At the
R:\
prompt, type
cd\win98\suspend
and press .
4 Type
mks2d
and press .
5 Press the power button until the computer turns off.
6 Remove the System Software CD from the CD or DVD drive.
7 Turn on the computer.