Protecting against electrostatic discharge – Dell Inspiron 3800 User Manual
Page 11
Safety Instr uctions
11
•
Handle memory modules with care. Don’t touch the components on a
module. Hold a module by its edges.
CAUTION:
There is a danger of a new battery exploding if it is
incorrectly installed. Replace the battery only with the same or
equivalent type recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
Protecting Against Electrostatic Discharge
To prevent static damage, discharge static electricity from your body before
you touch anything inside your computer and periodically while you work
inside the computer. You can do so by touching an unpainted metal surface
on the back of the computer.
You can also take the following steps to prevent static damage:
•
Do not remove items from their antistatic packing material until you
are ready to install them in your computer. Just before unwrapping the
antistatic packaging, be sure to discharge static electricity from your
body.
•
When transporting a sensitive component, first place it in an antistatic
container or packaging.