Display cable, Replacing the display panel, Removing the display cable – Dell Vostro 1710 (Early 2008) User Manual
Page 43
1 M2.5 x 5-mm screws (2) 2 M2 x 3-mm screws (8)
3 display panel
4 top cover
Replacing the Display Panel
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
This procedure assumes that you have completed the removal procedure
1. Replace the eight M2 x 3-mm screws in the display panel.
2. Position the display panel assembly in the top cover.
3. Align the guide pins at the top of the display hinge panels and position the display panel in the top cover.
4. Replace the two M2.5 x 5-mm screws in the hinges.
5. Replace the display bezel (see
6. Replace the display assembly (see
Replacing the Display Assembly
7. Replace the keyboard (see
8. Replace the hinge cover (see
9. Reconnect the antenna to the WLAN card (see
).
Display Cable
Removing the Display Cable
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
1. Follow the instructions in
Before Working on Your Computer
.