4 jumpers and connectors – CyberResearch CPEX P4-24-X User Manual
Page 16
CPEX Series
CyberResearch
®
CPU Cards
4
©Copyright 2005 CyberResearch, Inc.
Audio
z
Audio: Realtek ALC655 AC’97 Audio CODEC, 16-bit, full-duplex AC'97
Rev. 2.3 compatible six-channel audio CODEC designed for PC
multimedia systems.
z
Connector: Line-out connector on rear I/O panel and CD-in, line-out,
mic-in pin-headers
Power Consumption & Environment
z
Power consumption:
Pentium 4 Northwood 3.0GHz CPU (2GB DDR400 DDR-SDRAM):
[email protected], [email protected], [email protected], [email protected].
Pentium 4 Prescott 3.4GHz CPU (2GB DDR400 DDR-SDRAM):
[email protected], [email protected], [email protected], [email protected].
z
Power Supply: 350-Watt power supply or higher is recommended.
z
Power control function: meets ACPI 1.1 specification.
z
Operating Temperature: 0°~60° (*CPU needs Cooler & silicone
heat
sink paste)
z
Relative Humidity: 5%~95%, non condensing
WARNING:
1. Never run the processor without the heat sink and CPU Fan.
2. Be sure to connect ATX_12V power connector (PW) for the CPU power.
1.4 Jumpers and Connectors
Jumpers on CPEX series can be used to set the system configuration according to
your application. CPEX series is also equipped with Connectors that allow you to
connect external devices such as HDD, FDD, K/B, Printer, etc.
The tables below list the function of jumpers and connectors on CPEX series.
Jumpers
Label
Function
CLR_CMOS
Clear CMOS Setup
JP1
Compact Flash Master/Slave Function Setting