Using networks, Network setup wizard – Dell Precision M90 User Manual
Page 54
Back to Contents Page
Using Networks
Dell Precision™ M90 User's Guide
Physically Connecting to a Network or Broadband Modem
Wireless Local Area Network (WLAN)
Physically Connecting to a Network or Broadband Modem
Before you connect your computer to a network, the computer must have a network adapter installed and a network cable connected to it.
To connect a network cable:
1.
Connect the network cable to the network adapter connector on the back of your computer.
2.
Connect the other end of the network cable to a network connection device or a network wall connector.
Network Setup Wizard
The Microsoft® Windows® XP operating system provides a Network Setup Wizard to guide you through the process of sharing files, printers, or an Internet
connection between computers in a home or small office.
1.
Click the Start button, point to All Programs® Accessories® Communications, and then click Network Setup Wizard.
2.
On the welcome screen, click Next.
3.
Click Checklist for creating a network.
4.
Complete the checklist.
5.
Return to the Network Setup Wizard and follow the instructions on the screen.
NOTE:
Insert the cable connector until it clicks into place, and then gently pull the cable to ensure that it is securely attached.
NOTE:
Do not use a network cable with a telephone wall connector.
NOTE:
Selecting the connection method labeled This computer connects directly to the Internet enables the integrated firewall provided with Windows
XP Service Pack 2 (SP2).