beautypg.com

Network problems, Power problems, General – Dell Precision M90 User Manual

Page 103: Mobile broadband network

background image

If you experience other memory problems —

l

 

Reseat the memory modules to ensure that your computer is successfully communicating with the memory (see

Memory

).

l

 

Ensure that you are following the memory installation guidelines. See

Memory

.

l

 

Run the Dell Diagnostics. See

Dell Diagnostics

.

 

Network Problems

Fill out the Diagnostics Checklist (see

Diagnostics Checklist

) as you complete these checks.

 

 

General

 

Check the network cable connector —

Ensure that the network cable is firmly inserted into both the network connector on the back of the computer and the

network jack.

 

Check the network lights on the network connector —

No light indicates that no network communication exists. Replace the network cable.

 

Restart the computer and log on to the network again.

 

Check your network settings —

Contact your network administrator or the person who set up your network to verify that your network settings are correct

and that the network is functioning.

 

Mobile Broadband Network

 

Cannot connect —

The Dell Mobile Broadband Card must be activated on the network in order to connect. Position the mouse over the

icon in the

notification area to read the status of the connection. If the status indicates the mobile broadband card is not activated, see

Activate your Mobile Broadband

card

for more information. If problems persist, contact your Mobile Broadband service carrier for details on your plan.

 

Check your Mobile Broadband network service —

Contact your Mobile Broadband service carrier to verify coverage plan and supported services.

 

Check the status in the Dell Mobile Broadband Card Utility —

Click the

icon in the taskbar to launch the utility. Check the status in the main window:

l

 No card detected

– Restart the computer and launch the utility again.

l

 Wireless Disabled

– Ensure that the Dell Wi-Fi Catcher™ switch is in the "on" position. Additionally, right-click the

icon and ensure that the switch

is enabled.

l

 Searching

– The Dell Mobile Broadband Card Utility has not yet located a Mobile Broadband network. If the searching state persists, ensure that the

signal strength is adequate.

l

 No service

– The Dell Mobile Broadband Card Utility did not locate a Mobile Broadband network. Ensure that the signal strength is adequate. Restart

the Dell wireless utility or contact your Mobile Broadband network provider.

l

 Check your WWAN service

– Contact your Mobile Broadband network service provider to verify coverage plan and supported services.

 

Activate your Mobile Broadband card —

Before you connect to the Internet, you must activate the Mobile Broadband service through your cellular service

provider. For instructions and for additional information about using the Dell Mobile Broadband Card Utility, see the user's guide available through the
Windows Help and Support Center. To access the Help and Support Center, see

Windows Help and Support Center

. The user's guide is also available on the

Dell Support website at support.dell.com and on the CD included with your Mobile Broadband card if you purchased the card separately from your computer.

 

Power Problems

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTE:

The Dell Mobile Broadband Card Utility user's guide is located under Help and Support. You can also download the user's guide from

support.dell.com.

NOTE:

The

icon appears in the notification area if the computer has a Dell Mobile Broadband card installed. Double-click the icon to launch the utility.