Dell Latitude Cpi - Manual (Page 35)

Dell Latitude CP and CPi — Parts Removal and Replacement Guide 29
If removing the bezel from a 13.3-inch display — The bezel is secured by
snaps along its lower edge and hooks along its right and left edges.
a. Insert your fingertips between the lower edge of the bezel and the
LCD panel, and lift upward on the bezel to release the hidden snaps.
b. Lift the lower right corner of the bezel slightly, and then slide the bezel
off of the display assembly until the hooks on the right and left edges
release from the display-assembly top cover.
!
#
1. Remove the display assembly bezel.
2. Remove the display assembly latch:
a. If replacing the latch in a 12.1-inch display, lift the display assembly
latch straight up from the display-assembly top cover.
b. If replacing the latch in a 13.3-inch display, unsnap the latch and
captive spring from the inside of the display assembly top-cover
assembly.