Dell B3460dn Mono Laser Printer User Manual
Page 20
5
Under the Location heading, select Network Folder, and then configure the location settings.
6
Under the Authentication Options heading, select Use Kerberos authentication. The Kerberos credentials from
Smart Card Authentication Client will be used to access the network destination.
Notes:
•
This option is visible if the location is set to Network Folder.
•
If you select this option, then make sure that Use MFP authentication credentials is also selected.
7
In the sections that follow, adjust the settings.
•
Select check boxes to allow users to modify settings.
•
Use radio buttons and drop
‑down menus to specify the default settings.
8
Under the File heading, in the Name field, type a default base name for the scan file. The file extension is generated
automatically according to the value of the Format field in the Scan Settings section.
9
Click OK, and then click Apply.
10
Secure access to Scan to Network using Smart Card Authentication Client.
On printers running the Embedded Solutions Framework (eSF) version 3.0 or later:
a
Make sure that you have created a security template that uses Smart Card Authentication Client to obtain user
credentials. See
“Setting up a security template” on page 8
.
b
From the Embedded Web Server, click Settings > Security > Security Setup.
c
From Step 3 under the Advanced Security Setup heading, click Access Controls.
d
If necessary, expand the Device Solutions folder.
e
From the Scan to Network drop
‑down menu, select your security template.
f
Click Submit.
On printers running eSF version 2.0:
a
Access the Application Access Manager application configuration settings from the Embedded Web Server.
b
From the Scan to Network drop
‑down menu, select Smart Card Authentication Client.
c
Click Apply.
Note: If you are unsure about which version of eSF your printer is running, then see
the Embedded Solutions Framework is installed on a printer” on page 44
.
For more information about configuring Scan to Network, see the Scan to Network and Scan to Network Premium
Administrator’s Guide.
Configuring the applications
20