Dell Studio XPS 7100 (Mid 2010) User Manual
Page 44
Processor Cache L1
Displays the processor L1 cache size
Processor Cache L2
Displays the processor L2 cache size
Processor Cache L3
Displays the processor L3 cache size
Memory Installed
Indicates the amount of installed memory in MB
Memory Available
Indicates the amount of memory available in MB
Memory Speed
Indicates the memory speed in MHz
Memory Technology
Indicates the memory technology; DDR3
Standard CMOS Features
System Time
Displays the current time in hh:mm:ss format
System Date
Displays the current date in mm:dd:yy format
SATA1
Displays the SATA1 drive integrated in the computer
SATA2
Displays the SATA2 drive integrated in the computer
SATA3
Displays the SATA3 drive integrated in the computer
SATA4
Displays the SATA4 drive integrated in the computer
SATA5
Displays the SATA5 drive integrated in the computer
eSATA
Displays the eSATA drive integrated in the computer
Advanced BIOS Features
CPU Feature
l
Secure Virtual Machine Mode — Enabled or Disabled (Enabled by default)
l
AMD Cool 'N' Quiet — Enabled or Disabled (Enabled by default)
USB Device Setting
l
USB Controller — Enabled or Disabled (Enabled by default)
l
USB Operation Mode — High Speed; Full/Low Speed (High Speed by default)
Advanced Chipset Features
Onboard Audio Controller
Enabled or Disabled (Enabled by default)
SATA Mode
ATA/RAID (RAID by default)
Onboard LAN Controller
Enabled or Disabled (Enabled by default)
Onboard LAN Boot ROM
Enabled or Disabled (Disabled by default)
Boot Device Configuration
Boot Settings Configuration
Configures the settings during system boot
Hard Disk Boot Priority
Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected
CD/DVD Drives Boot Priority
Sets the CD/DVD drive boot priority. The items displayed are dynamically updated according to the drives detected
1st Boot Device
Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Drive; Disabled (Removable by default)
2nd Boot Device
Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default)
3rd Boot Device
Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Drive; Disabled (Hard Drive by default).
Boot Other Device
No; Yes (Yes by default)
Power Management Setup
ACPI Suspend Type
Specifies the ACPI suspend type. The default is S3
Remote Wake Up
This option turns on the computer when you try to access the computer through the LAN (Enabled by default)
AC Recovery
Specifies the behavior of the computer after recovering from a power loss (Off by default)
l
On — The computer turns on after it recovers from a power failure
l
Off — The computer remains off
l
Last — The computer returns to the power state it was in before the power failure
Auto Power On
Enables you to set an alarm to turn on the computer automatically
BIOS Security Features
Supervisor Password
Status of supervisor installed