Dell Dimension 8300 - Manual (Page 76)

76 A d d i n g Pa r t s
www
.dell.com | support.dell.com
5 Lift both hinge arms to the horizontal position.
6 Use the two view slots to align the pivot bar with the two pivot-bar slots.
NOTICE: Before touching anything inside your computer, ground yourself by touching an
unpainted metal surface, such as the metal at the back of the computer. While you work,
periodically touch an unpainted metal surface to dissipate any static electricity that could harm
internal components.
7 Pull the arms toward you until they snap into position.
If the hinge arms do not snap back into position on the first attempt, slightly
reposition the arms and try again.
8 After the hinge arms snap into position, lower and raise the arms two or three times to
properly seat them.
hinge arms in
horizontal
position
pivot bar
view slots (2)
pivot-bar slots (2)