Dell Inspiron X200 - Manual (Page 34)

Removing the Mini PCI Card
1. Disconnect the antenna cable from the Mini PCI card.
2. Release the Mini PCI card by spreading the metal securing tabs until the card pops up slightly.
3. Lift the Mini PCI card out of its connector.
Replacing the Mini PCI Card
1. Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card into the connector.
2. Connect the antenna cable to the antenna connector on the Mini PCI card.
3. Lower the Mini PCI card toward the inner tabs to approximately a 20-degree angle.
4. Continue lowering the Mini PCI card until it snaps into the inner tabs of the connector.
5. Replace the cover and tighten the captive screw.
Back to Contents Page
1 captive screw
2 Mini PCI card cover
NOTICE: The connectors are keyed for correct insertion; do not force the connections.