Dell Inspiron X200 - Manual (Page 13)

Back to Contents Page
Keyboard
Dell™ X200 Service Manual
Removing the Keyboard
1. Remove the battery .
2. Remove the six M2 x 4-mm screws labeled with an arrow (one of the six screws is labeled "K" with an arrow) from the bottom of the computer.
3. Turn the computer over, and insert a ¼ -inch flat-blade screwdriver into the slot to the right of the keyboard locator tab.
NOTICE: Disconnect the computer and any attached devices from electrical outlets.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read " Preparing to Work Inside the Computer " before performing the following procedure.
1 M2 x 4-mm screws (6)
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time- consuming to replace. Be careful when removing and handling the
keyboard.