beautypg.com

Replacing the processor thermal-cooling assembly – Dell Latitude 120L User Manual

Page 14

background image

 

Replacing the Processor Thermal-Cooling Assembly

 

1.

Lower the processor thermal-cooling assembly into place on top of the processor, aligning the numbered screws, labeled "1" through "4," with the
numbers on the fan assembly, and the arrow on the pull-strap pointing toward the outside edge of the system board.

 

2.

Tighten the four captive screws, labeled "1" through "4," in consecutive order.

 

3.

Replace the thermal-cooling/processor cover and tighten the screw.

Back to Contents Page

 

NOTICE:

Before you install the replacement processor thermal-cooling assembly, remove the mylar that covers the thermal grease on the assembly.