Module bay – Dell OptiPlex SX280 User Manual
Page 58
Back to Contents Page
Module Bay
Dell™ OptiPlex™ SX280 User's Guide
Installing a Device When Your Computer Is Turned Off
Installing a Device When Your Computer Is Running Microsoft® Windows®
Securing a Device in the Module Bay
You can install a Dell™ portable device such as a floppy drive, CD/DVD drive, or second hard drive in the module bay.
Your Dell computer ships with either a CD/DVD drive or an airbay (filler blank) installed in the module bay. You can secure a device in the module bay by two
methods:
l
locking switch (accessed by opening the cover)
l
(packaged separately.)
See "
Securing a Device in the Module Bay
" for more information about securing a device in your computer.
Installing a Device When Your Computer Is Turned Off
To install a device in the module bay:
1.
remove the
2.
If the module bay contains a device that is locked,
remove the cover
and move the module locking switch to the unlocked position by raising the locking
switch. If a device screw is used, remove the screw.
3.
Press the device latch release so that the latch release pops out.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
1 module locking switch