Media card reader – Dell Dimension 5000 User Manual
Page 89
Removing and Installing Parts
89
6 If you are installing a new floppy drive rather than replacing a drive, remove the drive-panel
7 Check all cable connections, and fold cables out of the way to provide airflow for the fan and
cooling vents.
8 Replace the drive panel (see page 78).
9 Replace the computer cover (see page 99).
NOTICE:
To connect a network cable, first plug the cable in to the network device and then plug it in to
the computer.
10 Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
11 Enter system setup (see page 105) and select the appropriate Diskette Drive option.
12 Verify that your computer works correctly by running the Dell Diagnostics (see page 46).
Media Card Reader
For information on using the Media Card Reader, see "Using a Media Card Reader (Optional)" on
page 19.
power cable
data cable
C7565bk1.book Page 89 Wednesday, January 26, 2005 1:37 PM