Dell PowerEdge 1600SC - Manual (Page 7)

After creating macros for the keys listed in Table B -1 , press on the client system's keyboard during terminal emulation to send the escape sequence
to the host system. The host system then interprets the sequence as .
Additional escape sequences may be required by certain utilities or functions on the host system. Create macros for the additional sequences listed in Table B -
2 .
Table B-2. Additional Escape Sequences
Back to Contents Page
<[> VT 100
<[><0> VT 220
NOTE: Escape-sequence key combinations listed in Table B -2 are case-sensitive. For example, to generate the character you must press
.
Key(s) Supported Sequence
(Reboot host system)
<x> <X><X>
<2> <2>