Dell 5330dn Workgroup Mono Laser Printer - Manual (Page 13)

Custom Setup
This menu selection is used to specify the width and length of the custom media.
Default Source
ISO B5
JIS B5
Statement
Executive
A5
A6
Monarch Env.
DL Env.
C5 Env.
C6 Env.
10 Env.
Custom
MPF
Type
Select the paper type currently
loaded in the multi-purpose
feeder. Plain Paper
Thick
Thicker
Thin
Colored
Preprinted
Recycled
Transparency
Labels
Card Stock
Bond
Letter Head
Menu selection: Purpose: Values:
Units Switches measurements between
millimeters and inches. INCH
Millimeters
l INCH: displays paper
width and length in inches.
l Millimeters: displays paper
width and length in
millimeters.
Tray
Width
Set the paper width of custom
media. 148 - 216 mm Set the custom width from 148 to
216 mm
Tray
Length
Set the paper length of custom
media. 210 - 355 mm Set the custom length from 210
to 355 mm
MPF
Width
Set the paper width of custom
media. 76 - 216 mm Set the custom width from 76 to
216 mm
MPF
Length
Set the paper length of custom
media. 127 - 355 mm Set the custom length from 127
to 355 mm
Menu selection: Purpose: Values:
Default Source Identifies the default paper
source. Tray
MP Feeder
If you loaded the same size and
type of paper in two paper
sources (and the Paper Size and
Paper Type menu items are
correctly set), the trays are
automatically linked. When one
paper source is empty, paper
automatically feeds from the next