License plate lamp, Replacement bulbs, Electrical system – Cadillac 2011 Escalade ESV User Manual
Page 445: Electrical system overload, Plate lamp -41, Bulbs -41, Overload -41
Black plate (41,1)
Cadillac Escalade/Escalade ESV Owner Manual - 2011
Vehicle Care
10-41
License Plate Lamp
1. Remove the two screws holding
each of the license plate lamps
to the molding that is part of the
liftgate.
2. Twist and pull the license plate
lamp assembly forward through
the molding opening.
3. Remove the bulb socket from
the lamp assembly by turning it
counterclockwise. Pull the bulb
straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 2 to
reinstall the license plate lamp.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-up Lamp
7441
License
Plate Lamp
168LL
(W5WLL)
For replacement bulbs not listed
here, contact your dealer.
Electrical System
Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load
is too heavy, the circuit breaker
opens and closes, protecting the
circuit until the current load returns
to normal or the problem is fixed.
This greatly reduces the chance of
circuit overload and fire caused by
electrical problems.