Driver installation, Creating a driver diskette – Dell Serial Attached SCSI Host Bus Adapter 5i Integrated and 5E Adapter User Manual
Page 19

Driver Installation
17
Driver Installation
The Dell™ Serial-Attached SCSI (SAS) 5 Host Bus Adapters (HBAs) require software drivers to operate
with the Microsoft
®
Windows
®
, Red Hat
®
Enterprise Linux
®
, and SUSE
®
Linux operating systems.
This chapter contains the procedures for installing the drivers for the following operating systems.
•
Microsoft Windows 2000 Server family
•
Microsoft Windows Server 2003 family
•
Windows Vista™
NOTE:
Only the SAS 5/i Integrated controller card supports Windows Vista.
•
Red Hat Enterprise Linux Versions 3, 4, and 5
•
SUSE
®
Linux Enterprise Server Versions 9 and 10
The four methods for installing a driver that are discussed in this chapter are:
•
Installing the driver during Windows operating system installation.
•
Installing a Windows driver for a new SAS 5 HBA.
•
Updating an existing Windows driver.
•
Installing or updating the the driver on a new or existing Linux operating system installation.
NOTE:
Device drivers are frequently updated. To ensure you have the latest version of any driver mentioned
in this section, check the Dell Support website at
support.dell.com. If a newer version exists, you can
download the driver to your system.
Creating a Driver Diskette
1 Browse to the download section for the system at the Dell Support website at support.dell.com.
2 Locate and download the latest SAS 5 HBA driver to the system. The drivers are packaged on the
Dell Support website such that it can be written to a diskette.
3 Follow the instructions on the Dell Support website for extracting the driver to the diskette.
KD534bk1.book Page 17 Monday, April 2, 2007 4:37 PM