Dell 3330dn Mono Laser Printer - Manual (Page 90)

Menu item Description
View Address Shows the assigned AppleTalk address
Note: The address can be changed only from the Embedded Web Server.
Set Zone
network>
Provides a list of AppleTalk zones available on the network
Note: The default setting is the default zone for the network. If no default zone
exists, the zone marked with an * is the default setting.
NetWare menu
This menu is available from the Network/Ports menu:
Network/Ports  Network Menu  Network Setup  NetWare
Menu item Description
Activate
Yes
No
Activates or deactivates NetWare support
Note: No is the factory default setting.
View Login Name
Shows the assigned NetWare login name
Note: This can be changed only from the Embedded Web Server.
Print Mode Shows the assigned NetWare print mode
Note: This can be changed only from the Embedded Web Server.
Network Number
Shows the assigned NetWare network number
Note: This can be changed only from the Embedded Web Server.
Select SAP Frames
Ethernet 802.2
Ethernet 802.3
Ethernet Type II
Ethernet SNAP
Enables the Ethernet frame type setting
Notes:
• On is the factory default setting for all menu items.
• Values for each of the Ethernet frame types are On and Off.
Packet Burst
Yes
No
Reduces network traffic by allowing the transfer and acknowledgement of
multiple data packets to and from the NetWare server
Note: Yes is the factory default setting.
NSQ/GSQ Mode
Yes
No
Specifies the NSQ/GSQ Mode setting
Note: Yes is the factory default setting.
Understanding printer menus
90