Canon SX200 LS - Manual (Page 70)

70
You can select the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
Set the mode dial to
G
(p. 42) .
Adjust the settings according to
your purposes
(pp. 70 – 80) .
Shoot.
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in red. Try the following
settings to obtain the correct exposure.
• Turn on the flash (p. 70)
• Select a higher ISO speed (p. 74)
You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 50 cm – 3.0 m (1.6 – 9.8 ft.), and at
maximum telephoto, it is 1.0 – 2.0 m (3.3 – 6.6 ft.)
Select
h.
● After pressing the r button, press the qr
buttons or turn the
 dial to select h,
then press the m button.
X Once set, h will appear.
G Shooting in Program AE
What if the shutter speed and aperture value are displayed
in red?
h Turning the Flash On
If you take multiple shots with the flash, the flash may become warm. This
is not a malfunction.