Canon SX200 LS - Manual (Page 115)

115
Move the zoom lever toward
k.
● The display will zoom in on the image and,
if you continue to hold the zoom lever, it
will continue to zoom in up to a factor of
10x.
● If you press the opqr buttons, you can
move the location of the displayed area.
● Move the zoom lever toward g to zoom
out or return to Single Image Playback.
● If you turn the  dial, you can switch
images in the zoomed state.
You can select from three transition effects when switching between images
in single image playback.
Select [Transition].
● Press the n button and select the 1
tab, then select [Transition] and use the
qr buttons to select a transition effect.
● Press the n button to accept the
setting.
k Magnifying Images
Approximate Location
of Displayed Area
Changing Image Transitions