Changing functions, Display off, P. 138) – Canon SX200 LS User Manual
Page 138: Turning off the power saving function, Setting the screen shut-off time
138
You can customize convenient and commonly used functions from the
3
tab
.
Turning off the Power Saving Function
You can set the power saving function
to [Off]. Setting it to [On] is
recommended to save battery power.
●
Select [Power Saving], then press the
m
button.
●
Press the
op buttons or turn the  dial to
select [Auto Power Down], then use the
qr
buttons to select [Off].
●
If you set the Power Saving function to [Off],
be careful not to forget to turn off the camera
after use.
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically
This also works when [Auto Power Down] is set to [Off].
●
Select [Power Saving], then press the
m
button.
●
Press the
op buttons or turn the  dial to
select [Display Off], then use the
qr buttons
to select a time.
●
In order to save battery power, it is
recommended to select less than [1 min.].
Changing Functions