Checking the ciscomcs operating system release, Obtaining additional assistance, Checking the cisco mcs operating system release – Cisco Conference Phone User Manual
Page 76
6-2
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 5.3
OL-10029-01
Chapter 6 Troubleshooting the Cisco Unified MeetingPlace Web Conferencing Release 5.3 Installation
Problems with the Cisco Unified MeetingPlace Web Conferencing Installation
4.
If the server is still not working properly, collect the following installation logs and contact your
Cisco support representative. Cisco Unified MeetingPlace Web Conferencing installation logs are
in C:\WINNT\.
–
mpwebstp.log
–
mpwebstp-jvm.log
–
mpwebstp-sql.log
–
mpwebstp-sqlsp3.log
Checking the Cisco MCS Operating System Release
You must have the Cisco MCS OS installed on a Cisco MCS before attempting to install Cisco
Unified MeetingPlace Web Conferencing. To check the release of your Cisco MCS operating system,
complete the following.
Before You Begin
To find out what release of the Cisco MCS operating system you are required to have, see the
for your release of Cisco Unified MeetingPlace Web Conferencing.
Procedure
Step 1
From Start > Settings, choose Control Panel.
Step 2
From the Help menu, choose About Windows and confirm the release of your operating system.
Step 3
Click OK.
Locating the Software Download Page on Cisco.com
Procedure
Step 1
Open your web browser to
d click Log In. Log in by using your Cisco.com user name
and password.
Step 2
Click Technical Support > Downloads.
Step 3
From the Software Center page, locate the “Related Tools” section in the lower right. Click Software
News.
Step 4
From the Software News page, scroll down to the “New Voice Software now available on Cisco.com”
section. Click win-OS-Upgrade-K9 2000-2-6sr1.exe or a later release.
Obtaining Additional Assistance
If there is a problem with a Windows service or the web server loses its connection, go to the
drive:\Program Files\Cisco Systems\MPWeb\datasvc directory and run dcdiags.bat as soon as possible
to generate a server log. All diagnostic information is stored under \Cisco Systems\MPWeb\Diagnostics.