Cisco Conference Phone User Manual
Page 41
3-9
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 5.3
OL-10029-01
Chapter 3 Installing Cisco Unified MeetingPlace Web Conferencing for a Segmented Meeting Access Configuration
How to Install Cisco Unified MeetingPlace Web Conferencing Release 5.3 in an SMA-2S Configuration
Copying GUIDS From the Internal Web Server to the External Web Server
The GUIDS entries for site and system must match between the internal and external web servers. Make
sure that you run the GUIDS.reg file on each external web server before installing Cisco
Unified MeetingPlace Web Conferencing.
Caution
You must complete this step before running the Cisco Unified MeetingPlace Web Conferencing installer
on the external web server. If this step is skipped or completed incorrectly, Presentation mode will not
work for internal users in external meetings. Recovering from this problem requires that you rebuild the
SQL Server database.
Before You Begin
Install Cisco Unified MeetingPlace Web Conferencing on your internal web server. For instructions, see
“Installing Cisco Unified MeetingPlace Web Conferencing on an Internal Server” section on page 3-8
Procedure
Step 1
Copy the GUIDS.reg file from the internal web server (located in drive:\Program Files\Cisco
Systems\MPWeb).
Step 2
Paste the GUIDS.reg file in to the external web server’s drive:\Temp directory.
Step 3
To install the GUIDS.reg file on the external web server, double-click it.
Step 4
When prompted to add the information from the GUIDS.reg file to the registry, click OK.
Step 5
Proceed to the
“Installing Cisco Unified MeetingPlace Web Conferencing on an External Server” section
.
Installing Cisco Unified MeetingPlace Web Conferencing on an External
Server
Restrictions
•
You must be installing Cisco Unified MeetingPlace Web Conferencing on a Cisco MCS with the
required Cisco MCS OS or a later release installed and running. Requirements are described in the
•
You must be deploying this Cisco MCS in a network segment, such as a DMZ.
Before You Begin
See
Chapter 2, “Installing Cisco Unified MeetingPlace Web Conferencing Release 5.3”
for assistance
with the installation.
Procedure
Step 1
Close any open applications.
Step 2
Verify that you have synchronized the GUIDSystemID and GUIDSiteID between the internal web server
and the external web server.