Dell PowerEdge Rack Enclosure 4210 - Manual (Page 29)

Dell™ PowerEdge™ 4210 Installation Guide
27
Figure 1-13. Rack Coupling Kit
3 Remove the doors and side panels from both racks. See "Removing the
Front Door,"
"Opening and Removing the Back Doors," and "Removing the Side
Panels."
4 Place the gasket strips, with their protective backing removed, on one of
the racks adjacent to the four locations where the hexagonal spacers will be
inserted into the racks (see Figure 1-14).
NOTE:
Do not cover the square holes in the rack frame with the gasket strips.
It does not matter on which rack you place the gasket strips, as long as the
strips protect both racks from being scratched.
1 gasket strip (4) 2 hexagonal spacer (4)
3 Allen screw (8) 4 stamped-metal crescent wrench
5 T-handle Allen wrench
1 2
3
4
5