beautypg.com

Citizen Systems 291 User Manual

Page 54

background image

CBM-290/291 User’s Manual

40

CITIZEN

(40) Aligning the characters

(ESC

a

n)

Code : [1b}h + [61]h + n

* {0

n

2}

Data is described in Hex code.

All the printed data within one line are aligned in the specified position.

Depending on n value, positional alignment is carried out as in the table below:

n (Hex)

POSITION

0

Left end alignment

1

Centering

2

Right end alignment

This is valid only when n is inputted at the beginning of line.

The initial value of n is "0".

(41) Full Cut

(ESC i)

Code : [1B]h + [69]h

Activating auto cutter (Full cut)

This is valid only when n is inputted at the beginning of line.

Make sure to feed the paper by 18 mm or more before cutting paper, unless characters remain before

the cutting point.

Print Result

Cutting Condition