Citizen Systems 291 - Manual (Page 48)

CBM-290/291 User’s Manual
34 CITIZEN
VALUE
BIT FUNCTION 0 1
0 Not defined
1 Not defined
2 Paper end Paper remains Paper out
3 Not defined
4 Not used Fixed to 0 –
5 Not defined
6 Not defined
7 Not defined
(Remarks) This command is valid only for serial interface mode.
(26) Specifying/Canceling Inverted Characters (ESC { )
Code : [1B]h + [7B]h + n
* {0
≤
n
≤
FF} Data is described in Hex code.
Specifying/canceling inverted characters.
•
"n" is valid only for the lowest bit (n0).
•
Bit n (n0) means the followings.
n0 Condition
0 Canceling inverted characters.
1 Specifying inverted characters.
•
Inverted printing means printing the line at 180° turned.
•
This is valid only when this is specified at the beginning of a line.
•
The initial value of n is "0".
(27) Specifying/Canceling 90° -right- turned Characters (ESC V n)
Code : [1B]h + [56]h + n
*{0
≤
n
≤
1} Data is described in Hex code.
Specifying/canceling characters 90°-right- turned character.
•
No underlines are attached to 90°-right- turned characters .
•
"n" means the followings.
n (Hex) Condition
0 Canceling 90° -right- turned Characters
1 Specifying 90° -right- turned Characters
•
The initial value of n is "0".