Citizen Systems 291 - Manual (Page 52)

CBM-290/291 User’s Manual
38 CITIZEN
(36) Printing Download Bit Image (GS / m)
Code : [1D]h + [2F]h + m
* {0
≤
m
≤
3} Data is described in Hex code.
Prints download bit iamges in a mode specified by m.
•
Modes can be selected by m are shown in table for selection with m are shown below.
m MODE NAME DOT DENSITY IN
VERTICAL DIRECTION
DOT DENSITY IN
HORIZONTAL DIRECTION
0 Normal mode 203 DPI 203 DPI
1 Double wide mode 203 DPI 101 DPI
2 Double high mode 101 DPI 203 DPI
3 Double wide/double high mode 101 DPI 101 DPI
•
When data exist inside the print buffer, this command is ignored.
•
When a download bit image has not been defined, this command is ignored.
•
A portion of a download bit image exceeding one line length is not printed.
•
A download character and a download bit image cannot be defined simultaneously.
(37) Starting / Ending Macro Definition (GS :)
Code : [1D]h + [3A]h
Specifying starting / ending macro definition. Maximum content available for macro definition is 2048
bytes. A portion exceeding 2048 bytes is not defined.
•
Even with ESC @ (initialization of the printer) having been executed, defined content is not cleared.
Therefore, it is possible to include ESC @ into the content of macro definition.
•
Normal printing operation is carried out even while in macro definition
(38) Macro Execution (GS ^ n1 n2 n3)
Code : [1D]h + [5E]h + n1 + n2 + n3
* {0
≤
n1
≤
FF}
{0
≤
n2
≤
FF}
{0
≤
3
≤
1} Data is described in Hex code.
Executing contents defined in macro.
•
"n1 - n3" indicate as follows:
n1 : The number of times of macro execution
n2 : Waiting time on macro execution
Waiting time of n2 x 100 msec is given for every execution.
n3 : Macro execution mode
n3 Mode
0 Continuous execution
1 Execution by LF SW