Clarion compact disc - Manual (Page 14)

Note:
• When the (center) of the ENT button is
pressed at a location that is less than 15 seconds
from the start or end of the track, that track may be
skipped and the previous or the next track may be
selected instead.
Switching to the other side of the
tape
Press the BND button . Playback is switched
to the other side of the cassette tape.
Auto reverse mechanism
When the end of the cassette tape is reached,
the other side of the tape is played automatical-
ly without pressing the BND button
.
FF scan function
1) Press the Scan button . The first 10 sec-
onds of all the tracks on the cassette tape are
played repeatedly.
* in the display becomes pink.
Note:
• Scanning is performed only for the track after the
one that is currently being played.
2) Press the Scan button at the desired track
to cancel scanning and start playback from
that position.
* in the display returns to the previous
color.
Repeat function
1) Press the Repeat button to play the cur-
rent track repeatedly.
* in the display becomes pink.
2) To cancel the repeat function, press the
Repeat button again to resume playback.
* in the display returns to the previous
color.
Dolby Noise Reduction System
Press the Dolby NR button to turn on the
Dolby B NR.
* in the display becomes pink.
• The Dolby Noise Reduction System is manufac-
tured under license of the Dolby Laboratories
Licensing Corporation.
• DOLBY, and the double D mark are registered
trademarks of the Dolby Laboratories Licensing
Corporation.
* To cancel the Dolby NR, press the Dolby NR but-
ton
to turn off the Dolby B NR. in the
display returns to the previous color.
Blank skip function
Press the Blank Skip button to skip playback
to the beginning of the next recorded section
when there is a blank space of 12 seconds or
more between selections.
* in the display becomes pink.
* To cancel the blank skip function, press the Blank
Skip button
again. Normal playback is
resumed and in the display returns to the
previous color.
Notes:
The APC, Scan, Repeat, and Blank skip functions
may not work normally with the following tapes:
• Tapes on which the recording level is low.
• Tapes on which there is less than 4 seconds of
blank space between selections.
• Tapes on which there are long pauses in the mid-
dle of selections.
• Tapes on which there is much noise between
selections.
BLS
19
BLS
19
N R 18
N R
18
RPT
17
RPT
17
SCN
16
SCN
16
13
13
11
20
English
Owner
’s Guide