beautypg.com

Ames Fire & Waterworks C300Na Stainless Steel Double Check Detector Assemblies with Bi-Link Check Valves User Manual

Colt, Installation, maintenance, & repair

background image

RP/IS-A-C200a/C300a

C200a OSY

www.amesfirewater.com

A Watts Water Technologies Company

Installation, Maintenance, & Repair

Colt

Series C200a, C300a

Double Check Valve Assemblies

Double Check Detector Assemblies
Sizes: 2

1

2

" – 6" (65-150mm)

NOTICE

For Australia and New Zealand, line strainers should be installed
between the upstream shutoff valve and the inlet of the backflow
preventer.

NOTICE

Due to shipping, storage, and general handling, the Victaulic
Coupling for the shutoff valves may have loosened and should be
retightened during installation.

Testing

For field testing procedure, refer to Ames installation sheets

IS-A-ATG-1 found on

www.amesfirewater.com.

For other repair kits and service parts, refer to our Backflow

Prevention Products Repair Kits & Service Parts price list

PL-A-RP-BPD found on

www.amesfirewater.com.

For technical assistance, contact your local Ames representative.

WARNING

!

Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information can

result in death, serious personal injury, property damage, or

damage to the equipment.
Keep this Manual for future reference.

You are required to consult the local building and plumbing

codes prior to installation. If the information in this manual

is not consistent with local building or plumbing codes,

the local codes should be followed. Inquire with governing

authorities for additional local requirements.

WARNING

!

Need for Periodic Inspection/Maintenance: This product must

be tested periodically in compliance with local codes, but at least

once per year or more as service conditions warrant. If installed on

a fire suppression system, all mechanical checks, such as alarms

and backflow preventers, should be flow tested and inspected in

accordance with NFPA 13 and/or NFPA 25. All products must be

retested once maintenance has been performed. Corrosive water

conditions, and/or unauthorized adjustments or repair could render

the product ineffective for the service intended. Regular checking

and cleaning of the product’s internal components helps assure

maximum life and proper product function.

WARNING

!

This manual is related to the following products: